The Thermalight Fixed Rooflights

There are three shape variants of the fixed Thermalight Pyramids available; square, elongated or octagonal. The units are frameless with the glazing sections structurally bonded to each other at 45 degrees creating a flush finish. This promotes self cleaning characteristics through good water run.

The square option comes as standard with an internal down-light built into the apex of the pyramid. As with the entire Thermalight range, the framework is kept to a minimum, allowing exceptional light transmission to the environment below.

Key Features:

• Maximum daylight - no internal framework
• Frameless self-clean design
• High thermal performance
• Guaranteed long life clarity
• Heavy duty construction
• Square internal downlighter as standard
• Hinged and fixed rooflight available
• Bespoke design
• Thermally broken framework

Technical Data	All sizes quoted are overall external weathered upstand sizes
Recommended minimum kerb height	150mm (to avoid invalidating roof guarantees).
Minimum kerb thickness	75mm (100mm for concealed hinged variants).
Recommended pitch on kerb	0 degrees
Standard glass	28mm DGU; 6mm toughened outer; 16mm black silicone sealed spacer; 6mm Low E coated toughened inner pane.
Minimum square outer kerb size	600mm
Maximum sized square unit	1500 x 1500mm
Oversized unit	Unit becomes elongated.
Maximum elongated dimensions	1500 x 2500mm (2.4 square metres for manual hinged).
Extra options	All square Pyramid Thermalights come with low voltage down lighters, hinged (manual/electric) units available on standard sizes (extra cost if different sizes).

Thermalight Fixed Pyramid rooflights can be manufactured to most configurations.
For more information, please call our technical department on 01276 451555. 

DOCUMENTATION:

Down Lighter Wiring (PDF)	Down Lighter Wiring (DWG)
Square Pyramid Kerb Detail (PDF)	Square Pyramid Kerb Detail (DWG)
Elongated Pyramid Kerb Detail (PDF)	Elongated Pyramid Kerb Detail (DWG)