Standard Thermalight


Thermalight Flat Fixed Glass Rooflights
Thermalight Logo

Thermalight Fixed Glass Rooflight

The Thermalight concept is based on an innovative design that delivers maximum daylight due to no internally visible framework. This low profile, high performance system is not prone to the 'water ponding' effect that rival glass products are prone to, due to it's intelligent use of flush external metalwork.

Thermalight rooflights are suitable for both flat and pitched applications, they are available in many shapes and sizes and even come in a walk on variant.

The Thermalight rooflight system is supplied with a complete fixing kit which includes concise fitting instructions for installation by construction tradesmen or DIY enthusiasts.

Single flat fixed Thermalights have a limit of 6 square meters or a length of 4 meters, anything above these limits should be treated as a Multi Pane Thermalight. 


Key Features:

  • Low profile
  • Simple installation
  • No internally visible framework
  • Bespoke sizes to order
  • Safety glass to both panels
  • High thermal performance
  • Large spans available
  • Easy clean and low maintenance
  • Walk on specification
  • Low E coating

Get a quote


The below table is a good guide of sizes available.  Please note that we are able to manufacture to any specific dimensions within the minimum and maximum parameters shown in the table.

Thermalight Size Chart

Technical Data All sizes quoted are overall external weathered upstand sizes
Recommended minimum kerb height 150mm (to avoid invalidating roof guarantees).
Minimum kerb thickness 75mm
Recommended pitch on kerb 5 degrees
Minimum glass size 400 x 400mm (smaller can be made but it's no longer a means of obtaining effective daylight)
Standard glass 28mm DGU; 6mm toughened outer; 16mm black silicone sealed spacer; 6mm Low E coated toughened inner pane.
Maximum single pane glass kerb size 3500mm x 1500mm span @ up to 5 degrees kerb pitch;
3500mm x 1700mm span @ 10 degrees and over pitched kerb
Standard sizes (outside kerb sizes) 1000mm x 1000mm / 1000mm x 1500mm / 1000mm x 2000mm

Thermalight Fixed rooflights can be manufactured to most configurations.
For more information, please call our technical department on 01276 451555. 

DOCUMENTATION:

Critical Kerb Pitch (PDF)

Critcal Kerb Pitch (DWG)

Typical Kerb Detail (PDF)

Typical Kerb Details (DWG)

If you would like assistance at any time about any of the rooflights or would like further details of our range, then please do not hesitate to contact us on 01276 451555, e-mail us at info@nationaldomes.com or use this e-mail form to contact us.


Website Design & Programming by Freetimers Internet | ©2009 National Domelight Company & Freetimers