The UK's Leading Supplier of Rooflights
Astroglaze Multi Part Rooflights

Astroglaze Multi Part Rooflights

Astroglaze Multi-Part & Bespoke Rooflight

Astroglaze Multi-Part Glass RooflightFor those jobs that require a large expanse of glass, and still need to look good, Astroglaze is also available as a multi-part system. The rooflight is supplied in smaller sections for easy construction on site.

During assembly the Astroglaze unit is supported until the joins between the panes are secured with a silicone sealant.
The finished rooflight sits firmly on the builder’s kerb in the usual way. Our multi-part glass rooflights provide a great way to glaze large areas and they come in either a grey, black or white polyester powder coating (see single units).

Maximum spans up to 5m can be accommodated. There is no limit on the length of the rooflight. Bay centres depend on span width. All outer panes have sandblasted borders for improved aesthetics.

Get a Quote< In addition to the standard glazing specification as listed, glazing can be specified as:
• Tinted • Solar Control • Dirt Resistant • Obscured • Toughened
inner glazing panes, as well as a wide range of other options – please contact our sales office for more details.

Glazing elements are contained within a thermally enhanced, welded aluminium frame, for installation to a builders’ kerb.

Astroglaze White Multi-Part Fixed Glass Rooflight Astroglaze Multi-Part Fixed Glass Rooflight Internal View


Astroglaze Multi-Part & Bespoke Rooflight Benefits

Standard Glass Specification
Double glazed units:
• 6/8mm clear toughened outer
• 16/18mm Argon filled cavity
• 6.8/8.8mm low-E laminated inner

Triple glazed units:
• 6mm clear toughened outer
• 16mm Argon filled cavity
• 6mm toughened middle
• 16mm Argon filled cavity
• 6.8mm low-E laminated inner

Frame Finish
• All units feature sealed double glazed units contained within a thermally enhanced aluminium frame, which is available in 3 polyester powder coated colours as standard: White RAL: 9010, Slate Grey RAL: 7015, Jet Black RAL: 9005. Other RAL colours are available. Please contact us for further information

Insulated Upstand
• If required, Astroglaze rooflights can be supplied complete with a vertical insulated upstand in a range of standard sizes

Thermal Insulation
• Total product U-values for double glazed multipart rooflights are as low as 1.4 W/m2k, exceeding the requirement for Part L compliance. Triple glazed units achieve total product U-values as low as
1.2 W/m2k
• U-value calculations can be supplied for specific rooflight configurations

Wall Abutment
• Astroglaze rooflights can be designed to accommodate wall abutment on up to three sides if required. This is particularly useful if a rooflight is required to be installed in a small roof area or tight space

 

Standard Kerb Detail

Astroglaze Mutli-Part Glass Rooflight Drawing

 Documentation

AG01F MP Flat Fixed Mutli Panel Section View up to 1100mm Span [PDF]

AG01F MP Flat Fixed Mutli Panel Section View up to 1100mm Span [DWG]

AG01F MP Flat Fixed Mutli Panel Section View 1100mm to 2200mm Span [PDF]

AG01F MP Flat Fixed Mutli Panel Section View 1100mm to 2200mm Span [DWG]

AG01F MP Flat Fixed Mutli Panel Section View 2200mm to 3200mm Span [PDF]

AG01F MP Flat Fixed Mutli Panel Section View 2200mm to 3200mm Span [DWG]

AG01F MP Flat Fixed Mutli Panel Section View 3200mm to 5000mm Span [PDF]

AG01F MP Flat Fixed Mutli Panel Section View 3200mm to 5000mm Span [DWG]

 

If you would like assistance at any time about any of the rooflights or would like further details of our range, then please do not hesitate to contact us on 01276 451555, e-mail us at info@nationaldomes.com or use this e-mail form to contact us.