We’re still delivering to our customers, but please let us know if you’re self-isolating so that we can make sure we’re delivering safely.
Thermalight Fixed Glass Rooflights
The Fixed Thermalight unit is specifically designed with no visible framework to ensure that the maximum amount of daylight floods into the space. The use of flush glazing external metalwork also means that the unit does not suffer from the ‘water-pooling’ effect experienced by some other products.
The units combine a high performance, silicone-bonded double glazed casement, with a polyester powder coated aluminium framework: RAL 7016 Grey Outer, and are suitable for both pitched and flat roofs. The Fixed Thermalight unit is easy to install and is supplied with a unique internal perimeter gasket that allows the rooflight to be positioned and screwed externally onto the builder’s kerb and a matching cover clip is then applied to conceal the fixings - no need for silicone to be applied on-site.
The double-glazed units are enveloped within the framework for added protection and to safeguard against possible breakage. Thermalight’s low-profile design – the top surface of the doubleglazed unit sitting flush with the external frame – means that rainwater will drain away with ease resulting in a naturally low maintenance product.
The extruded thermally broken aluminium frame is dual coloured as standard, and supplied powder coated to RAL 7016 (Grey Outer) and RAL9910 (White Matt Inner). External hip and ridge cappings are powder coated to RAL 7016 as standard but other RAL colour options are available upon request.
All Thermalight Roof Lanterns conform to BS5516-2:2004 up to a maximum height of 13 metres above floor level.
As a low profile, structurally silicone glazed unit, it is a fully watertight rooflight making it ideal for rooflights for use on flat roof areas which require a longer run of roof lighting than can be accommodated in a single span. Thermalight Multi-Part is based upon a fixed rooflight design. As a modular system, it’s fabricated in sections with silicone joints between sections and can be tailor-made to virtually any length. The extruded aluminium framework is supplied powder coated to RAL9005 Black Matt or RAL7016 Grey as standard. Other RAL colour options are available upon request.
Key Features – Fixed, Circular and Multi-Part
No internally visible framework (excluding Multi-Part)
Clear low ‘E’ coated glass as standard
Centre pane U-Value of 1.1W/m2K
Safety glass to both panes
Easy clean and low maintenance
High thermal performance
Stock sizes available
Bespoke sizes to order
10 year guarantee
Standard Kerb Detail
If you would like assistance at any time about any of the rooflights or would like further details of our range, then please do not hesitate to contact us on 01276 451555, e-mail us at email@example.com or use this e-mail form to contact us.